SATO CL4NX Operator's Manual page 105

LPD
Interface > Network > Services > LPD
Set whether or not to enable the functions for LPD.
The options are as follows:
• Enabled: Enable the LPD function.
• Disabled: Disable the LPD function.
FTP
Interface > Network > Services > FTP
Set whether or not to enable the functions for FTP.
The options are as follows:
• Enabled: Enable the FTP function.
• Disabled: Disable the FTP function.
SNMP
Interface > Network > Services > SNMP
Set the functions for SNMP.
The SNMP function enables you to monitor and manage the network that
is UDP/IP based.
The setting items are as follows:
1 Agent
2 Traps
Agent
Interface > Network > Services > SNMP > Agent
Set the Agent function.
The setting items are as follows:
1 Enable
2 Read-Only
3 Read-Write
Set the Agent function.
Set the Traps function.
Use the Agent function.
Set the Read-Only function.
Set the Read-Write function.
4 Operation and Configuration
CL4NX Operator Manual
103