SATO CL4NX Operator's Manual page 147

Change Platen
System > Notifications > Change Platen> Change Platen
Set whether or not to enable the notification function about the replace-
ment timing of the platen roller.
The options are as follows:
• Enabled: Enable the notification function.
• Disabled: Disable the notification function.
Platen Interval
System > Notifications > Change Platen> Platen Interval
Set the notification interval about the replacement timing of the platen
roller.
Available to change if you have selected Enabled in Change Platen
menu.
The printer shows the fed distance as the setting value.
The setting range is 0 to 999 km.
Note:
You can disable the notification function if you set to 0.
Sound
System > Sound
Set the buzzer sound.
The setting items are as follows:
1 Error Sound Set the buzzer volume for notification of the
error.
4 Operation and Configuration
CL4NX Operator Manual
145