Boot Version; Kernel Version; Build Version - SATO CL4NX Operator's Manual

Fanfold
Information > Help > Replace Paper > Fanfold
Shows the video for replacement of fan-fold media.
The setting items are as follows:
1 Standard
2 Cutter

Boot Version

Information > Boot Version
Shows the boot version of this printer.
The setting items are as follows:
1 Disks
2 Warp!!-mode

Kernel Version

Information > Kernel Version
Shows the kernel version of this printer.

Build Version

Information > Build Version
Shows the firmware version of this printer.
Shows the video for replacement of fan-fold
media to the standard printer.
Shows the video for replacement of fan-fold
media to the printer installed with cutter.
Shows the Disks.
4 Operation and Configuration
CL4NX Operator Manual
161