SATO CL4NX Operator's Manual page 146

4 Operation and Configuration
Change Cutter
System > Notifications > Change Cutter > Change Cutter
Set whether or not to enable the notification function about the replace-
ment timing of the cutter unit.
The options are as follows:
• Enabled: Enable the notification function.
• Disabled: Disable the notification function.
Cutter Life
System > Notifications > Change Cutter > Cutter Life
Set the notification interval about the replacement timing of the cutter unit.
Available to change if you have selected Enabled in Change Cutter
menu.
The printer shows the cutter count as the setting value.
The setting range is 0 to 99 M cuts.
Note:
You can disable the notification function if you set to 0.
Change Platen
System > Notifications > Change Platen
Notify the replacement timing of the platen roller.
The setting items are as follows:
1 Change Platen
2 Platen Interval
3 Platen Count
144
CL4NX Operator Manual
Set whether or not to enable the notification
function about the replacement timing of the
platen roller.
Set the notification interval about the replace-
ment timing of the platen roller.
Shows the current distance the platen roller has
fed.