Applications Menu - SATO CL4NX Operator's Manual

4 Operation and Configuration
4.4.3

Applications Menu

In the Applications menu, there are setting items as follows:
Applications
1 Protocol
2 SBPL
3 SZPL
4
SIPL
5 STCL
6 SDPL
Protocol
Applications > Protocol
Set the printer language.
The options are as follows:
• SBPL: Set when you use the SBPL printer language.
• SZPL: Set when you use the SZPL printer language.
• SIPL: Set when you use the SIPL printer language.
• STCL: Set when you use the STCL printer language.
• SDPL: Set when you use the SDPL printer language.
Caution:
After setting, power on the printer again to enable the new setting. The
printer language on the online/offline screen shows in red before you
enable the new setting.
SBPL
Applications > SBPL
To use SBPL as the printer command, set the items as follows:
1 Show Error
2 Standard Code
3 Font Settings
128
CL4NX Operator Manual
Set the printer language.
Set the SBPL printer command.
Set the SZPL printer command.
Set the SIPL printer command.
Set the STCL printer command.
Set the printer command.
SDPL
Set whether or not to enable the command
error indication.
Set the protocol code.
Set the font.