SATO CL4NX Operator's Manual page 114

4 Operation and Configuration
User
Interface > Network > Services > SNMP > Traps > User
Set the user name of Traps.
Shows if you have selected 3 in SNMP Version menu.
You can type alphabetic, numeric and symbolic characters in the range of
1 to 32 characters.
Initial setting: trapuser
Engine ID
Interface > Network > Services > SNMP > Traps > Engine ID
Set the engine ID.
Shows if you have selected 3 in SNMP Version menu.
The engine ID is created from the MAC address.
Security
Interface > Network > Services > SNMP > Traps > Security
Set the security level.
Shows if you have selected 3 in SNMP Version menu.
The options are as follows:
• None:
• Authentication
• Privacy
Authentication Protocol
Interface > Network > Services > SNMP > Traps > Authentication Protocol
Set the authentication protocol.
Shows if you have selected Authentication or Privacy in Security menu.
The options are as follows:
• MD5
• SHA
112
CL4NX Operator Manual