SATO CL4NX Operator's Manual page 125

Ignore CAN/DLE
Interface > Ignore CAN/DLE
Set whether or not to ignore the CAN/DLE code of the received data.
The options are as follows:
• Enabled: Ignore the CAN/DLE code.
• Disabled: Does not ignore the CAN/DLE code.
External I/O
Interface > External I/O
To use external (EXT) terminal for the interface between the host and the
printer.
The setting items are as follows:
1 Enable
2 Signals
3 EXT I/O Re-print
Caution:
After setting, power on the printer again to enable the new setting.
Enable
Interface > External I/O > Enable
Set whether or not to enable the external terminal.
The options are as follows:
• Enabled: Enable the external signal (EXT) function.
• Disabled: Disable the external signal (EXT) function.
Set whether or not to enable the external termi-
nal.
Set the external signal.
*Shows if you have selected Enabled in
Enable menu.
Set the reprint function that uses the external
terminal.
*Shows if you have selected Enabled in
Enable menu.
4 Operation and Configuration
CL4NX Operator Manual
123