SATO CL4NX Operator's Manual page 88

4 Operation and Configuration
Mode
Interface > Network > Settings > IPv4 > Mode
Select the setting mode of the IP address.
The options are as follows:
• DHCP: Get the IP address, gateway and subnet mask from the DHCP
server automatically.
• Static: Set the IP address, gateway and subnet mask manually.
Caution:
After setting, power on the printer again to enable the new setting.
DHCP
Interface > Network > Settings > IPv4 > DHCP
Get the IP address from the DHCP server again.
Shows if you have selected DHCP in Mode menu.
You can get the IP address again if you press the
soft button when Renew Lease shows on the screen.
IP Address
Interface > Network > Settings > IPv4 > IP Address
If you have selected Static in Mode menu, set the IP address.
The setting range is as follows:
000.000.000.000 to 255.255.255.255
Netmask
Interface > Network > Settings > IPv4 > Netmask
If you have selected Static in Mode menu, set the subnet mask address.
The setting range is as follows:
000.000.000.000 to 255.255.255.255
86
CL4NX Operator Manual
button or the right