SATO CL4NX Operator's Manual page 124

4 Operation and Configuration
PSW
Interface > Bluetooth > PSW
Set the communication parameter PSW.
The setting range is 17 to 4096.
Set to a value that is lower than the setting value of the communication
parameter PSI.
CRC Mode
Interface > Bluetooth > CRC Mode
Set whether or not to enable the functions for CRC.
The options are as follows:
• Enabled: Enable the CRC function.
• Disabled: Disable the CRC function.
Flow Control
Interface > Bluetooth > Flow Control
Set the communication protocol.
The options are as follows:
• Status3
• Status4 Multi
• None
Ignore CR/LF
Interface > Ignore CR/LF
Set whether or not to ignore the CR/LF code of the received data.
The options are as follows:
• Enabled: Ignore the CR/LF code.
• Disabled: Does not ignore the CR/LF code.
122
CL4NX Operator Manual