Interface Menu - SATO CL4NX Operator's Manual

4 Operation and Configuration
4.4.2

Interface Menu

In the Interface menu, there are setting items as follows:
Interface
1 Network
2 Ports
3 IEEE1284
4 RS-232C
5 USB
6 Bluetooth
7 Ignore CR/LF
8 Ignore CAN/DLE
9 External I/O
10 RFID
Caution:
After setting, power on the printer again to enable the new setting.
Network
Interface > Network
To use LAN and wireless LAN for the interface between the host and the
printer.
The setting items are as follows:
1 Settings
2 Services
84
CL4NX Operator Manual
Set the LAN connection and the wireless LAN
connection.
Set the Main-port and Sub-port.
Set the IEEE1284 connection.
Set the RS-232C connection.
Set the USB connection.
Set the Bluetooth connection
Set to ignore CR/LF codes.
Set to ignore CAN/DLE codes.
Set the external signal (EXT).
Set the RFID.
Set the IPv4, IPv6 or wireless LAN.
Set the port for connection, NTP, LPD, FTP or
SNMP.