SATO CL4NX Operator's Manual page 92

4 Operation and Configuration
DNS
Interface > Network > Settings > IPv6 > DNS
If you have selected Static in Mode menu, set the primary address of the
DNS server.
The setting range is as follows:
0:0:0:0:0:0:0:0 to
Note:
You can register the DNS server up to three IP addresses. You can use
comma to delimit different IP addresses.
Wi-Fi
Interface > Network > Settings > Wi-Fi
Set the wireless LAN.
Shows if you have installed the wireless LAN (option).
The setting items are as follows:
1 Wi-Fi Protected
Setup
2 Wi-Fi Direct
3 SSID
4 Hidden SSID
5 Mode
6 Channel
7 Security
8 WEP Conf.
9 WPA Conf.
10 EAP Conf.
Caution:
After setting, power on the printer again to enable the new setting.
90
CL4NX Operator Manual
Set the wireless LAN connection with WPS
function.
Set the SSID.
Set the Hidden SSID.
Set the communication mode.
Set the communication channel.
Set the security (encryption method).
Set the WEP key.
*Shows if you have selected WEP in Security
menu.
authentication
Set the WPA
*Shows if you have selected
WPA2
in Security menu.
Set the EAP authentication.
*Shows if you have selected Dynamic WEP in
Security menu.
.
WPA+WPA2 or