SATO CL4NX Operator's Manual page 40

3 Installing Carbon Ribbon and Media
3
Pull out the media holder guide  and
media guide  away from the printer.
Turn the knob
media guide.
4
Install the media to the media holder .
Put the media roll all the way in.
5
Push the media holder guide  lightly
against the media roll.
6
Pass the media below the media damper
 and the media sensor guide .
Make sure that the end of the media comes out from
the front of the printer.
38
CL4NX Operator Manual
 counterclockwise to release the
1
6
5
3
2
1
4