SATO CL4NX Operator's Manual page 118

4 Operation and Configuration
Flow Control
Interface > IEEE1284 > Flow Control
Set the communication protocol.
The options are as follows:
• Status4 Multi
• Status5
• None
BCC
Interface > IEEE1284 > BCC
Set whether or not to enable the functions for BCC.
Shows if you have selected Status5 in Flow Control menu.
The options are as follows:
• Enabled: Enable the BCC check function.
• Disabled: Disable the BCC check function.
RS-232C
Interface > RS-232C
Set the RS-232C connection.
The setting items are as follows:
1 Baudrate
2 Parameters
3 Flow Control
4 BCC
Caution:
After setting, power on the printer again to enable the new setting.
116
CL4NX Operator Manual
Set the communication speed.
Set the data parameter.
Set the communication protocol.
Set the BCC check function.
*Shows if you have selected Status5 in Flow
Control menu.