Imaging
Printing > Imaging
Set the print reference position in the vertical and horizontal directions.
The setting items are as follows:
1
Vertical
2
Horizontal
Base Reference
Offset of Horizontal
Point after offset
Base Reference
Point
Vertical
Printing > Imaging > Vertical
Set the print position in the vertical direction.
Set the offset value from the print reference position with '+' to move away
from the feed direction, and with '-' to move toward the feed direction.
The setting range is -792 to +792 dots.
Offset the print position in the vertical (feed)
direction.
Offset the print position in the horizontal direc-
tion.
Label
Liner
Pitch
Offset of Vertical
Base Reference
Point
Print reference position
4 Operation and Configuration
CL4NX Operator Manual
73