SATO CL4NX Operator's Manual page 87

Settings
Interface > Network > Settings
Set the IPv4, IPv6 or wireless LAN.
The setting items are as follows:
1 IPv4
2 IPv6
3 Wi-Fi
Caution:
You cannot use LAN and wireless LAN at the same time. The wireless
LAN function is available if you have installed the wireless LAN.
IPv4
Interface > Network > Settings > IPv4
Set the IPv4. The setting items are as follows:
1 Mode
2 DHCP
3 IP Address
4 Netmask
5 Gateway
6 DNS
Set the IPv4.
Set the IPv6.
Set the wireless LAN.
*Shows if you have installed the wireless LAN
(option).
Select the setting mode of the IP address.
Update the lease time of the IP address.
*Shows if you have selected DHCP in Mode
menu.
Set and check the IP address.
If you have selected DHCP in Mode menu, the
screen shows the IP address got from the
DHCP server.
If you have selected Static in Mode menu,
select to set the IP address.
Set and check the subnet mask address.
If you have selected DHCP in Mode menu, the
screen shows the subnet mask address got
from the DHCP server.
If you have selected Static in Mode menu,
select to set the subnet mask address.
Set and check the default gateway address.
If you have selected DHCP in Mode menu, the
screen shows the gateway address got from
the DHCP server.
If you have selected Static in Mode menu,
select to set the default gateway address.
Set and check the primary address of the DNS
server.
If you have selected Static in Mode menu,
select to set the primary address of the DNS
server.
4 Operation and Configuration
CL4NX Operator Manual
85