SATO CL4NX Operator's Manual page 186

6 Troubleshooting
Error
No.
RFID write error
1018
RFID module error
1019
Calendar error
1020
BCC check error
1021
Overheat error
1022
184
CL4NX Operator Manual
Message
Could not write to the RFID
chip.
To clear error:
Press the Can-
cel button.
RFID module is not operating
correctly
To clear error:
Power off the
printer.
The date and time of the calen-
dar IC are incorrect.
To clear error:
Power off the
printer.
The BCC code of the data to
be sent (one item) is incorrect.
To clear error:
Press the
button or cancel
the job.
The temperature of the printer
has exceeded the tolerance
To clear error:
value.
Stop the opera-
tion of the printer
and wait until the
temperature
decreases.
Cause
Discard this tag.
Replace the module.
Check if you have installed the
calendar IC or replace the cal-
endar PCB.
Check the data to be sent and
the communication settings.
button: Resume printing
from the print data where BCC
error occurred.
Cancel button: Cancel the print
data with BCC error and
resume printing from next item.
Send SUB command: Clear
the BCC error and resume
printing from where it stopped.
Send CAN command: Cancel
the print data with BCC error
and resume printing from next
item.
Stop the operation of the
printer to let the temperature
decreases.
Countermeasure