SATO CL4NX Operator's Manual page 112

4 Operation and Configuration
Enable
Interface > Network > Services > SNMP > Traps > Enable
Set whether or not to enable the functions for Traps.
The options are as follows:
• Enabled: Enable the Traps function.
• Disabled: Disable the Traps function
SNMP Version
Interface > Network > Services > SNMP > Traps > SNMP Version
Set the version of SNMP.
The options are as follows:
• 1
• 2c
• 3
IP Version
Interface > Network > Services > SNMP > Traps > IP Version
Set the version of IP.
The options are as follows:
• 4
• 6
Destinations
Interface > Network > Services > SNMP > Traps > Destinations
Set the number of Traps Destinations.
The setting range is 1 to 3.
110
CL4NX Operator Manual