5.6.2
Pressure Balance Setting
The adjustment procedures of the pressure balance are as follows:
1
Open the top cover of the printer and find the adjustment dials on the top of the
print head assembly as shown.
2
Turn the adjustment dials according to the media width and set the pressure
balance.
Media Width (mm)
Pressure balance gradation
*This table shows an example when the head pressure is Left
Note
• The factory default setting is Left
25 - 59
Left
Right
and Right
.
5 Cleaning and Adjustment of the Printer
60 - 95
96 - 131
Left
Left
Right
Right
.
CL4NX Operator Manual
179