SATO CL4NX Operator's Manual page 36

3 Installing Carbon Ribbon and Media
5
From the ribbon supply spindle , pass
the carbon ribbon below the print head .
6
Wind the carbon ribbon counterclockwise
to the ribbon rewind spindle  and grip
sheet .
Turn the ribbon rewind spindle counterclockwise for
some rounds to wind the carbon ribbon.
7
If the media is already installed, press the
print head down until the head lock lever
is locked.
If the media is not installed, continue with
3.5 Installing the
8
Close the top cover.
34
CL4NX Operator Manual
Section
Media.
7
2
5
6