SATO CL4NX Operator's Manual page 98

4 Operation and Configuration
Key #1 - Key #4
Interface > Network > Settings > Wi-Fi > WEP Conf. > Key #1 - Key #4
Set the WEP key #1 - key #4.
You can type alphabet (upper case and lower case) and numeral.
Depending on the length of WEP key, the number of character you can set
is as follows:
• When the key length is 64 bit
ASCII: Five characters
Hexadecimal: Ten characters
• When the key length is 128 bit
ASCII: Thirteen characters
Hexadecimal: Twenty-six characters
WPA Conf.
Interface > Network > Settings > Wi-Fi > WPA Conf.
authentication
Set the WPA
Shows if you have selected
The setting items are as follows:
1 WPA Authentica-
tion
2 PSK
3 EAP Conf.
WPA Authentication
Interface > Network > Settings > Wi-Fi > WPA Conf. > WPA Authentication
Set the WPA authentication method.
The options are as follows:
• Personal (PSK)
• Enterprise (802.1x)
• CCKM
96
CL4NX Operator Manual
.
WPA+WPA2 or WPA2
in Security menu.
Set the WPA authentication method.
Set the PSK shared key.
*Shows if you have selected Personal (PSK) in
WPA Authentication menu.
Set the functions for EAP.
*Shows if you have selected item other than
Personal (PSK) in WPA Authentication
menu.