SATO CL4NX Operator's Manual page 121

BCC
Interface > USB > BCC
Set whether or not to enable the functions for BCC.
Shows if you have selected Status5 in Flow Control menu.
The options are as follows:
• Enabled: Enable the BCC check function.
• Disabled: Disable the BCC check function.
Bluetooth
Interface > Bluetooth
Set the Bluetooth connection.
The setting items are as follows:
1 Enable
2 Name
3 Pin Code
4 BD Address
5 Firm Version
6 Host BD Addr
7 Authentication
8 ISI
9 ISW
10 PSI
11 PSW
12 CRC Mode
13 Flow Control
Caution:
After setting, power on the printer again to enable the new setting.
Set whether or not to enable the functions for
Bluetooth.
Set the device name of the printer.
Set the PIN code.
Shows the BD address of this printer.
You cannot change this item.
Shows the firmware version of the Bluetooth.
You cannot change this item.
You can check the Host BD address.
Authentication level Setting
Set the communication parameter ISI.
Set the communication parameter ISW.
Set the communication parameter PSI.
Set the communication parameter PSW.
Set the CRC check function.
Set the communication protocol.
4 Operation and Configuration
CL4NX Operator Manual
119