Port2
Interface > Network > Services > Ports > Port2
Set the port number.
The setting range is 1 to 65535.
You cannot set the same number as port 1 and port 3.
Port3
Interface > Network > Services > Ports > Port3
Set the port number.
The setting range is 1 to 65535.
You cannot set the same number as port 1 and port 2.
Flow Control
Interface > Network > Services > Ports > Flow Control
Set the communication protocol.
The options are as follows:
• Status4
• Status4 ENQ
• Status3
• Status5
• None
BCC
Interface > Network > Services > Ports > BCC
Set whether or not to enable the functions for BCC.
Shows if you have selected Status5 in Flow Control menu.
The options are as follows:
• Enabled: Enable the BCC check function.
• Disabled: Disable the BCC check function.
4 Operation and Configuration
CL4NX Operator Manual
101