Installing The Options; Installing The Optional Cutter Kit/Partial Cutter Kit - SATO FX3-LX Operator's Manual

Hide thumbs Also See for FX3-LX:

Table of Contents

Installing the Options

Do not connect or disconnect the power cord while your hands are wet. Doing so could

cause an electric shock.

Do not touch the terminals with wet hands.

Touching the edge of the print head with your bare hand could cause injury.

Be careful not to touch the cutter blade.

1. Make sure that the printer is powered off, and disconnect the power cord from the

AC outlet or remove the optional battery.

2. Press the cover open button (1) to open the top cover (2).

3. While pushing the lock buttons (3) on both sides, tilt the dispenser kit (4) toward

the front to remove it.

Installing the Optional Cutter Kit/Partial Cutter Kit