SATO CL4NX Operator's Manual page 101

Verify Server Cert.
Interface > Network > Settings > Wi-Fi > WPA Conf. > EAP Conf. > Verify
Server Cert.
Set whether or not to enable the server authentication.
Shows if you have selected others than LEAP in EAP Mode menu.
The options are as follows:
• Enabled: Enable the server authentication.
• Disabled: Disable the server authentication.
Private Key P/W
Interface > Network > Settings > Wi-Fi > WPA Conf. > EAP Conf. > Private
Key P/W
Set the Private Key password.
Shows if you have selected PEAP, TLS or TTLS in EAP Mode menu.
You can type alphabetic, numeric and symbolic characters in the range of
0 to 64 characters.
PAC Auto Provisioning
Interface > Network > Settings > Wi-Fi > WPA Conf. > EAP Conf. > PAC
Auto Provisioning
Set whether or not to enable PAC Auto Provisioning.
Shows if you have selected FAST in EAP Mode menu.
The options are as follows:
• Enabled: Enable PAC Auto Provisioning.
• Disabled: Disable PAC Auto Provisioning.
4 Operation and Configuration
CL4NX Operator Manual
99