SATO CL4NX Operator's Manual page 131

Show Error
Applications > SBPL > Show Error
Set whether or not to enable the command error indication.
• Enabled: Enable the command error indication.
• Disabled: Disable the command error indication.
Standard Code
Applications > SBPL > Standard Code
Set the protocol code.
• Enabled: Use the standard code.
• Disabled: Use the non-standard code.
Font Settings
Applications > SBPL > Font Settings
Set the font.
The setting items are as follows:
1 Zero Slash
2 Kanji
3 Proportional
4 €
Zero Slash
Applications > SBPL > Font Settings > Zero Slash
Set whether to print the numeral zero (0) with or without slash (/).
The options are as follows:
• Enabled: Print zero with slash.
• Disabled: Print zero without slash.
Set the type for printing zero.
Set the kanji code to be used.
Set the character width for printing.
Set the code of the European currency symbol.
4 Operation and Configuration
CL4NX Operator Manual
129