SATO CL4NX Operator's Manual page 102

4 Operation and Configuration
Services
Interface > Network > Services
Set the port for connection, NTP, LPD, FTP or SNMP
The setting items are as follows:
1 Ports
2 NTP
3 LPD
4 FTP
5 SNMP
Ports
Interface > Network > Services > Ports
The setting items are as follows:
1 Port1
2 Port2
3 Port3
4 Flow Control
5 BCC
Port1
Interface > Network > Services > Ports > Port1
Set the port number.
The setting range is 1 to 65535.
You cannot set the same number as port 2 and port 3.
100
CL4NX Operator Manual
Set the port number.
Set the functions for NTP.
Set the functions for LPD.
Set the functions for FTP.
Set the functions for SNMP.
Set the port number.
Set the port number.
Set the port number.
Set the communication protocol.
Set the functions for BCC.
*Shows when you have selected Status5 in
Flow Control menu.