SATO CL4NX Operator's Manual page 126

4 Operation and Configuration
Signals
Interface > External I/O > Signals
Set the external signal.
Shows if you have selected Enabled in Enable menu.
The setting items are as follows:
1 EXT 9PIN
2 EXT Mode
3 Inputs
4 Outputs
EXT 9PIN
Interface > External I/O > Signals > EXT 9PIN
Set the output signal of the EXT 9PIN.
The options are as follows:
• MODE1: Outputs the print wait signal from the 9PIN.
• MODE2: Outputs the offline signal from the 9PIN.
EXT Mode
Interface > External I/O > Signals > EXT Mode
Set the type of the external signal (EXT).
The options are as follows:
• TYPE1
• TYPE2
• TYPE3
• TYPE4
*Refer to Section 7.9.6 External Signal Interface (EXT) for the
Chart of the EXT Output
124
CL4NX Operator Manual
Set the output signal of the EXT 9PIN.
Set the mode of the external signal.
Set the input pin No. of Signal Print Start/Signal
Reprint.
Set the output pin No. of the signal.
Signal.
Timing