SATO CL4NX Operator's Manual page 137

Control Code
Applications > STCL > Command Head > Control Code
Set the control code.
The options are as follows:
• AUTO: Do the protocol detection automatically.
• ESC|LF|NUL
• 7B|7C|7D
• CUSTOM: Change the first to third byte codes.
1st Byte Code
Applications > STCL > Command Head > 1st Byte Code
Set the first byte code.
You can change if you have selected CUSTOM in Control Code menu.
The setting range is 0 to 255.
2nd Byte Code
Applications > STCL > Command Head > 2nd Byte Code
Set the second byte code.
You can change if you have selected CUSTOM in Control Code menu.
The setting range is 0 to 255.
3rd Byte Code
Applications > STCL > Command Head > 3rd Byte Code
Set the third byte code.
You can change if you have selected CUSTOM in Control Code menu.
The setting range is 0 to 255.
4 Operation and Configuration
CL4NX Operator Manual
135