Tools Menu - SATO CL4NX Operator's Manual

4.4.5

Tools Menu

In the Tools menu, there are setting items as follows:
Tools
1 Test Print
2 HEX-Dump
3 Reset
4
Service
5 Factory
6 Wi-Fi Site Survey
7
Certificates
8
Startup Guide
Test Print
Tools > Test Print
Do the test print.
The setting items are as follows:
1 Factory
2 Configure List
3 Configure QR
Do the test print.
Save the Hex Dump print data or the dump
data from receive buffer to the USB memory.
Initialize the configuration of the printer.
These are the setting items for service.
Strictly for SATO authorized service personnel
use.
These are the setting items for service.
Strictly for SATO authorized service personnel
use.
Examine the access point of the wireless LAN.
Set the wireless LAN authentication.
* Available only when you have installed the
USB memory.
Set whether or not to enable the startup guide.
Do the factory test print.
Print the configuration information of the printer.
Print the configuration information with the QR
code.
4 Operation and Configuration
CL4NX Operator Manual
149