Chrysler 2005 Crossfire SRT6 Service Manual page 322

5 - 156 BRAKES - ABS ELECTRICAL DIAGNOSTICS
1100-LEFT FRONT WHEEL SPEED SENSOR CIRCUIT (CONTINUED)
7.
MEASURE THE RESISTANCE OF THE LEFT FRONT WHEEL SPEED SENSOR 12 VOLT SUPPLY CIRCUIT
With the ignition off.
Measure the resistance of the Left Front Wheel Speed Sensor 12 Volt
Supply circuit from the CAB harness connector to the Left Front Wheel
Speed Sensor harness connector.
Is the resistance below 5.0 ohms?
Yes >> Go to 8
No >> Repair the Left Front Wheel Speed Sensor 12 Volt Supply
circuit for an open.
Perform ABS VERIFICATION TEST.
8.
MEASURE THE RESISTANCE OF THE LEFT FRONT WHEEL SPEED SENSOR SIGNAL CIRCUIT
With the ignition off.
Reconnect the CAB harness connector.
Measure the resistance between ground and the Left Front Wheel
Speed Sensor Signal circuit.
Is the resistance less than 100 ohms?
Yes >> Go to 11
No >> Go to 9
ZH