Chrysler 2005 Crossfire SRT6 Service Manual page 356

5 - 190 BRAKES - ABS ELECTRICAL DIAGNOSTICS
1120-LEFT REAR WHEEL SPEED SENSOR CIRCUIT (CONTINUED)
7.
MEASURE THE RESISTANCE OF THE LEFT REAR WHEEL SPEED SENSOR 12 VOLT SUPPLY CIRCUIT
With the ignition off.
Measure the resistance of the Left Rear Wheel Speed Sensor 12 Volt
Supply circuit from the CAB harness connector to the Left Rear Wheel
Speed Sensor harness connector.
Is the resistance below 5.0 ohms?
Yes >> Go to 8
No >> Repair the Left Rear Wheel Speed Sensor 12 Volt Supply
circuit for an open.
Perform ABS VERIFICATION TEST.
8.
MEASURE THE RESISTANCE OF THE LEFT REAR WHEEL SPEED SENSOR SIGNAL CIRCUIT
With the ignition off.
Reconnect the CAB harness connector.
Measure the resistance between ground and the Left Rear Wheel
Speed Sensor Signal circuit.
Is the resistance less than 100 ohms?
Yes >> Go to 11
No >> Go to 9
ZH