Sensor (Adf Media Exit) Fan Bracket Assembly Removal (Models X654, X656, And X658) - Lexmark X651de Service Manual

4. Remove the four screws (A) securing the ADF media pinch pad assembly.
A
5. Remove the ADF media pinch pad assembly.
Sensor (ADF media exit) fan bracket assembly removal (models X654, X656, and
X658)
1. Remove the ADF cover, front. See
X658)" on page
2. Remove the ADF rear cover. See
X658)" on page
3. Open the ADF top door assembly.
4. Disconnect the ground strap, the fan (CN12) harness, and the media exit sensor (CN9) harness.
5. Remove the two screws (A) on the front and rear of the sensor (ADF media exit) fan bracket assembly.
6. Remove the sensor (ADF media exit) fan bracket assembly.
Note: Remove the fan filter cover assembly from the used sensor (ADF media exit) fan bracket assembly, and
install on the new sensor (ADF media exit) fan bracket assembly.
Replacement note: Be sure to reinstall the ground strap.
"ADF cover, front removal (models X651, X652, X654, X656, and
4-62.
"ADF cover, rear removal (models X651, X652, X654, X656, and
4-63.
7462
4-73
Repair information