Standard Media Exit Bin Full Actuator Removal - Lexmark C935 Service Manual

5057-XXX

Standard media exit bin full actuator removal

1. Remove the rear cover assembly. See
Warning: Ensure that the rear left middle cover is removed before removing the rear left upper cover, or damage
will occur.
2. Remove the rear left middle cover. See
3. Remove the rear left upper cover. See
4. Remove the screw securing the standard exit top cover (A) to the machine.
5. Gently lift the standard exit top cover (A) from the machine.
6. Remove the standard exit top cover (A) from the machine.
7. Remove the screw securing the bracket (B) to the machine.
8. Remove the bracket (B).
9. Gently flex the standard media exit bin full actuator (C) to detach it from the machine.
10. Remove the standard media exit bin full actuator (C) from the machine.
4-18
Printer Service Manual
Connectors
A
"Rear cover assembly removal" on page
"Rear left middle cover removal" on page
"Rear left upper cover removal" on page
4-5.
4-6.
4-7.
Previous
Next
Go Back