Gestetner CP6244 Operating Instructions Manual page 97

No. Mode
8 I/O Timeout
9 I/O Buffer
10 Menu Reset
Description
You can specify the time for which the interface remains en-
abled even after it is finished receiving data. When the time set
has elapsed, it becomes possible for this machine to receive data
from another interface.
Important
❒ If the time that you set is too short, time might run out while
data is still being received. As a result, data from another in-
terface may cut in, or the emulation detector may be activat-
ed to switch to a different emulation.
Note
❒ Default: 30Sec.
You can specify the capacity of the reception buffer.
Note
❒ Default: 32KB
You can reset the Online Print settings back to their defaults.
However, settings for"IP Address", "Network", and the
"Ethernet Speed" cannot be changed using "Menu Reset".
User Tools Menu
3
79