Stack Memory Mode - Gestetner CP6244 Operating Instructions Manual

Note
❒ If you wish to check the image
before printing, press the { { { { Auto
Cycle} } } } key before pressing the
{ { { { Start} } } } key, in order to disable
Auto Cycle mode. See p.17
"When Auto Cycle mode is off".
Reference
For details on how to use the
optional document feeder when
printing in Memory mode, see
p.64 "Using th e Document
Feeder in Normal Memory
Mode".

Stack Memory Mode

Limitation
❒ To use Stack Memory mode, you
need to first set Memory Mode to
"Stack" using the user tools. See
"12 Memory Mode" on p.75 "4
Mode Setting".
Note
❒ You can make prints for up to 30
classes at one time.
A A A A
Press the { { { { Memory/Class} } } } key.
B B B B
Use the { { { { ~ ~ ~ ~ } } } } { { { { } } } } } } } } keys to select
Memory, and then press the { { { { OK} } } }
key.
C C C C
With the number keys, enter the
desired number of prints for each
class, and then press the { { { { q
Note
❒ Repeat this step until you have
entered for all your classes.
D D D D
Press the { { { { OK} } } } key.
E E E E
If you are using the optional tape
dispenser, turn on the tape dis-
penser switch.
F F F F
Set your original.
G G G G
Press the { { { { Start} } } } key.
Printing starts automatically after
ZLKS052N
the trial print.
Memory Mode
1
q } } } } key. q q
ZLKS030N
41