Other Printing Problems - Gestetner CP6244 Operating Instructions Manual

Other Printing Problems

Status
Multiple pages are fed through
the machine at once.
The image is printed on the re-
verse side of the paper.
Paper misfeeds occur frequent-
ly.
The display panel error message
stays on after removing the mis-
fed paper.
It takes too much time to com-
plete the print job.
<Windows 2000/Windows XP
only>
Combine printing cannot be
done as specified.
<Windows 2000/XP only>
The set option cannot be select-
ed in the print menu.
The same page is being master
made many times.
Text put under a graphic is
printed.
When using custom sized pa-
per, the print image cannot be
printed exactly as it appears on
the screen.
Possible Causes, Descriptions, and Solutions
Remove all paper from the Paper Feed Tray and fan it gently
to get air between the sheets. After that, load it back into the
Paper Feed Tray .
Load the paper the other way up.
Check the paper size settings. The size set with the paper size
dial might be different from the actual paper size. Make the
correct dial setting.
Use the recommended paper. Avoid using curled, folded,
wrinkled, perforated or glossy paper.
Open the front cover of the machine and then close it.
The data is so large or complex that it takes time to process
it. If the Data In indicator is blinking, the data processing is
being done. Just wait until it is finished.
Make sure that the same orientation is set, as well as the same
paper size set in the application.
Check the [Layout] tab.
If a different size has been set, select the correct paper size
and orientation.
The option may not be set correctly.
Set the option correctly in the [Device Settings] tab.
Make sure to clear the "Collated" check box in the print dia-
log box of the application.
< Windows 2000 only >
Even if the check mark is cleared in the "Collated" check box,
master making may be done everytime a page is going to be
printed. In this case, make sure to clear the "Collated" check
box displayed when selecting "Copy Count" in the [Advanced
Options] dialog box of the printer driver.
• Windows 95/98/Me
Select [Print True Type as graphics] in [Fonts] tab.
• Windows 2000/XP
Click [Advanced] on the [Paper/Quality] or [Layout] tab to
display the [Advanced Options] dialog box, and then select
"Disable" in [Print Optimizations] in [Document Options].
Set the paper transversally on the Paper Feed Tray.
Enter the size of the paper in the [Width] and [Height] (or
[Length]) boxes on the computer.
Other Printing Problems
4
37