Gestetner CP6244 Operating Instructions Manual page 186

Windows 2000 Configuration
Configuring LPR Port Printing
This section explains the procedure for printing to a LPR port from Windows
2000.
Note
The following procedure assumes that the printer drivers have already been
2
installed. This is the procedure to change the printer port to LPR.
The TCP/IP protocols must be installed and configured correctly. For more
information about configuring the protocols, see p.15 "Configuring TCP/IP
and IPP for Printing".
A A A A
Click [Start], point to [Settings], and then click [Printers].
B B B B
Click the icon of the machine you want to use. On the [File] menu, click
[Properties].
C C C C
Click the [Ports] tab, and then click [Add Port].
D D D D
In the [Available port types:] box, click "LPR Port", and then click [New Port].
Note
If "LPR Port" does not appear, "Print Services for Unix" has not been in-
stalled.
E E E E
Type the IP address of the Network Interface Board into the [Name or address
of server providing lpd:] box.
F F F F
Type "lp" into the [Name of printer or print queue on that server:] box, and click
[OK].
G G G G
Click [Close].
H H H H
Make sure that the port name is displayed in the [Print to the following port(s)]
box and the check box is selected, and then click [OK].
22