Gestetner CP6244 Operating Instructions Manual page 232

NetWare Configuration
C In the [NDS Context:] box, type the context in which the print server is to
be created.
Click [Browse] to select a context among those listed in the [Browse] dialog
box.
As a context, object names are typed from a lower level object and divided
by a period. For example, if you want to create a print server into NET un-
der DS, type "NET.DS".
D In the [Print Server Operation Mode] group, click [As Remote Printer].
E In the [Remote Printer No.] box, type the printer number.
Important
5
Use the same printer number as that of the printer to be created in the
print server.
F Click [OK] to close the property sheet.
G After the confirmation dialog box appears, click [OK].
J J J J
On the [NIB] menu, click [Exit] to exit the NIB Setup Tool.
K K K K
From Windows, run NWAdmin.
Reference
For more information about NWAdmin, see the documentation that comes
with the NetWare.
L L L L
Create a print queue as follows:
A Select the container object the print queue is located in among those in
the directory tree, and click [Create] on the [Object] menu.
B In the [Class of new object] box, click "Print Queue", and click [OK].
C In the [Print Queue name] box, type the name of the print queue.
D In the [Print Queue Volume] box, click [Browse] button.
E In the [Available objects] box, click the volume in which the print queue is
created, and click [OK].
F Check the settings, and then click [Create].
M M M M
Create a printer as follows:
A Select the container object the printer is located in, and click [Create] in
the [Object] menu.
B In the [Class of new object] box, click "Printer", and click [OK]. When you
are using NetWare 5/5.1, click "Printer (Non NDPS)".
68