Gestetner CP6244 Operating Instructions Manual page 305

ARP&RARP&BOOTP
None (Factory Settings)
RARP&BOOTP
*1
The valid methods are in order from the left: ARP+PING, RARP+TFTP,
BOOTP, DHCP.
Note
❒ It is necessary to set the server when using RARP+TFTP, BOOTP, and
DHCP.
❒ When setting the IP address on the control panel, use None.
Reference
See Network Printing Guide when using DHCP.
D Press the [OK].
This completes the Network boot settings.
H H H H
Press the { { { { User Tools} } } } key.
A message "
Parameter settings have been changed. You must re-
start the machine before the new settings take effect.
on the display panel.
I I I I
Turn off and on the main power switch of the machine.
The set items become valid.
Item
RARP+TFTP
BOOTP
DHCP
Valid method
AP RA BO
b b b
b
b
b b
Network Settings
*1
DH
1
b
" appears
11