Changing The Printer Name; Changing The Zone - Gestetner CP6244 Operating Instructions Manual

Changing the Printer Name

If the network has several same model printers, the names will be the same.
Printers that have the same name will have their names changed slightly in the
Chooser on Mac OS or Printer list on Mac OS Χ. For example, three printers
named "printer" will appear in the chooser as "printer0", "printer1" and
"printer2".
Use applications such as Apple Printer Utility or LaserWriter Utility to change
printer names in the Macintosh EtherTalk environment. These utilities are dis-
tributed by Apple Computer, Inc.

Changing the Zone

It may be necessary to change the zone configuration.
Use applications such as Apple Printer Utility or LaserWriter Utility to change
the zone configuration in the Macintosh EtherTalk environment. These utilities
are distributed by Apple Computer, Inc.
Note
If the Macintosh is configured to use TCP/IP, you can change the zone con-
figuration with a Web Browser. See p.80 "Configuring the Network Interface
Board with a Web Browser".
Follow these steps to use the Apple Printer Utility.
A Insert the CD-ROM into the CD-ROM drive.
B
Copy the "Zone Name.ps" file in the "Zone Name" folder to the hard disk.
C
Open the copied "Zone Name.ps" file using a text editor, and change "New-
Zone", which is in the second line from the bottom, to the name of the new
zone.
%!PS-Adobe2.0
%%Title: Changing Zone (EtherNet only)
%%CreationDate: Tue Dec 16 1997
%%EndComments
true 0 startjob not {ERROR} if
(%EtherTalk%) << /EtherTalkZone (NewZone) >> setdevparams
%%EOF
D
Save "Zone Name.ps".
E Run the Apple Printer Utility, and select the printer for which the new zone
name is to be used.
F Select [Send PostScript File] in the [Utilities] menu, and send "Zone Name.ps" to
the printer.
Configuring Macintosh
75
6