Making Color Prints; Printing In Two Colors - Gestetner CP6244 Operating Instructions Manual

Optional Functions

Making Color Prints

A
Make sure that the color drum in-
dicator on the panel display is lit.
2
B
Set your original.
C
Specify the print settings and en-
ter the number of prints with the
number keys.
D
Press the {Master Making} key.
Printing starts automatically after
the trial print.
Note
❒ If you wish to check the image
before printing, press the {Auto
Cycle} key before pressing the
{Master Making} key, in order to
disable Auto Cycle mode. See
p.18 "When Auto Cycle mode is
off".
72

Printing in Two Colors

After printing in one color, you can
print in another color on the same
side of the print.
R
AQN040S
Important
❒ Let the ink on the prints dry for a
while before printing on them
again.
❒ If the prints are still wet when you
print on them again, the paper feed
roller might become dirty. In this
case, wipe the roller with a cloth.
Note
❒ You cannot print in two colors at a
time.
A
Prepare two originals. Place the
first on the exposure glass or in
the optional document feeder.
AQN024S
R
P P
GRCOLO0E
ZDCH110E