Gestetner CP6244 Operating Instructions Manual page 215

5. NetWare Configuration
This chapter describes how to configure the machine to use as a print server or
a remote printer in a NetWare environment.
Note
The NetWare settings are performed in Web Status Monitor or SmartDevice-
Monitor for Admin. See the corresponding online Help for details.
Installing the NIB Setup Tool
A utility called the NIB Setup Tool is provided to configure the machine to work
in a network environment. This section describes how to install the SmartDe-
viceMonitor for Admin, and how to run the NIB Setup Tool.
Limitation
The NIB Setup Tool is supported to work with the following operating sys-
tems.
• Microsoft Windows 95/98/Me
• Microsoft Windows 2000/Microsoft Windows XP
• Microsoft Windows NT 4.0
Installing SmartDeviceMonitor for Admin
Follow these steps to install the SmartDeviceMonitor for Admin.
Preparation
You should install the SmartDeviceMonitor for Admin on the computer. If
you install the SmartDeviceMonitor for Admin from a file server or run it via
the network, the SmartDeviceMonitor for Admin might not work correctly.
Make sure to close all applications before starting the installation procedure.
A A A A
Close all the applications that are currently running.
B B B B
Insert the CD-ROM labeled "Printer Drivers and Utilities" into the CD-
ROM drive.
C C C C
Open [Control Panel], and double-click the [Add/Remove Programs] icon.
D D D D
On the [Install/Uninstall] tab, click [Install].
E E E E
Click [Next >].
51