Printer Properties Settings - Gestetner CP6244 Operating Instructions Manual

Making machine settings from an application
To make the machine settings for a specific application, open the [Printer Proper-
ties] dialog box from that application. The following example describes how to
make settings for the WordPad application that comes with Windows NT 4.0:
Note
The actual procedures you should follow to open the [Printer Properties] dialog
box may vary depending on the application. For more information, see the
documentation that comes with the application you are using.
Any settings you make in the following procedure are valid for the current
application only.
A A A A
On the [File] menu, click [Print].
The [Print] dialog box appears.
B B B B
Select the machine you want to use in the [Name] list box, and then click
[Properties].
The [Document Properties] dialog box appears.
C C C C
Make any settings you require and click [OK].
D D D D
Click [OK] to start printing.

Printer Properties Settings

Make the settings for this machine, such as the paper size for Paper Feed Tray,
and the availability of options (Type A only).
Note
In this section, the setting items peculiar to this machine are explained. For
other setting items, see the documentation that comes with Windows NT 4.0
or Help.
[Device Settings] tab
Click the item to be set. A change setting box will appear on the bottom of the
[Properties] window and you can make a setting.
[Form To Tray Assignment]
Paper sizes can be assigned to Paper Feed Tray. Normally, they are not set.
You can also select "Not Available".
Windows NT 4.0
1
19