Getting Started
F F F F
Press the { { { { User Tools} } } } key.
1
A message "
start the machine before the new settings take effect.
on the display panel.
G G G G
Turn off and on the main power switch of the machine.
The set items become valid.
Other Settings
The followings are other items you can set using the control panel besides the IP
address and the Network boot:
Note
❒ The settings are performed in Web Status Monitor or SmartDeviceMonitor
for Admin. See the corresponding online Help for details.
Subnet mask
Default gateway address
Access control address
Access control mask
Frame Type (Netware)
Valid protocol
14
Parameter settings have been changed. You must re-
Items
Factory Settings
000.000.000.000
000.000.000.000
000.000.000.000
000.000.000.000
Automatic selection
All valid
" appears