Admin. Mode; Online Paramet's - Gestetner CP6244 Operating Instructions Manual

5 Admin. Mode

❖ User Codes
If user codes are turned on, operators must enter their user codes before they can operate
the machine. The machine keeps count of the number of copies made under each user code.
See "3 Set User Code" below.
1 Check Counter
2 Reset Counters
3 Set User Code
4 Key Counter Adj.

6 Online Paramet's

Limitation
❒ The optional PC controller is required.
No. Mode
1 Auto Online
2 Print Size
You can check the number of masters and copies made under
each user code.
You can clear each or all user code counters.
Note
❒ Default: Single
Reference
To clear the number of masters and copies, see p.83 "5-2 Re-
set Counters".
You can select whether or not to use User Code mode.
Note
❒ Default: Do not use
Normally, the optional key counter counts the number of prints
regardless of the number of masters used. You can, however,
add to the key counter a value between 0 and 50 to the key
counter each time a new master is used.
Note
❒ Default: 0
❒ Range of adjustment: 0–50
Description
You can select to have Auto On Line mode as either "On" or
"Off" when the power is turned on, or after mode settings have
been cleared.
Note
❒ Default: On
You can specify the paper size that is selected by default when
you press the {On Line} key.
Note
❒ Default: Auto
User Tools Menu
3
81