Recalling The Stored Settings - Gestetner CP6244 Operating Instructions Manual

Operation

Recalling the Stored Settings

A A A A
Press the { { { { Memory/Class} } } } key.
1
B B B B
Use the { { { { ~ ~ ~ ~ } } } } { { { { } } } } } } } } keys to select Re-
call, and the press the { { { { OK} } } } key.
C C C C
Use the { { { { ~ ~ ~ ~ } } } } { { { { } } } } } } } } keys to select the
number to recall, and then press
the { { { { OK} } } } key.
D D D D
Confirm that the settings are cor-
rect, and then press the { { { { OK} } } } key.
Note
❒ To change the stored settings,
use the { { { { ~ ~ ~ ~ } } } } { { { { } } } } } } } } keys to select
t h e i t e m t h a t y o u w i s h t o
change, and then overwrite us-
ing the number keys.
E E E E
Set your original.
48
F F F F
Press the { { { { Start} } } } key.
Printing starts automatically after
the trial print.
ZLKS052N
Note
❒ If you wish to check the image
before printing, press the { { { { Auto
Cycle} } } } key before pressing the
{ { { { Start} } } } key, in order to disable
Auto Cycle mode. See p.17
"When Auto Cycle mode is off".
ZLKS030N