Gestetner CP6244 Operating Instructions Manual page 35

F F F F
Lower the exposure glass cover.
G G G G
Specify the print settings.
H H H H
Enter the number of prints with
the number keys.
Note
❒ If you have made a wrong en-
try, press the { { { { Clear/Stop} } } } key
and then enter the number
again.
When Auto Cycle mode is on
A Check that Auto Cycle mode is on.
ZFRH061E
B Press the { { { { Start} } } } key.
ZLKS032N
Printing starts automatically af-
ter the trial print.
When Auto Cycle mode is off
A Check that Auto Cycle mode
has been disabled.
Standard Printing
1
ZLKS035N
ZLKS030N
ZLKS035N
17