Gestetner CP6244 Operating Instructions Manual page 155

Introduction
This manual contains detailed instructions on configuring the machine as a net-
work printer. Read the section appropriate to your network environment on
how to configure the machine correctly.
Windows 95/98/Me
Windows 2000
Important
The procedures written in this manual assume that you are a network admin-
istrator. If you are not, be sure to consult your network administrator before
configuration.
Features
• Support for 100BASE-TX and 10BASE-T
• The Network Interface Board is compatible with Windows 95/98/Me
(TCP/IP, NetBEUI, IPP
dows XP (TCP/IP, IPP
NetWare (IPX/SPX, TCP/IP) and Macintosh (AppleTalk)
allows you to use the machine in a network that uses different protocols
and operating systems.
• A computer used as a dedicated print server is not required because the
Network Interface Board can be configured as a NetWare print server.
• The Network Interface Board can connect the machine to the network
without requiring its own power supply because the Network Interface
Board is installed inside the machine.
*1
IPP (Internet Printing Protocol) is a protocol for printing via the Internet.
*2
Only Type80 RCP80 can be used on Macintosh.
Windows 2000, Windows XP,
Windows NT (Server)
NetWare (Server)
Windows XP
Windows NT
*1
), Windows 2000 (TCP/IP, NetBEUI, IPP
*1
), Windows NT 4.0 (TCP/IP, NetBEUI, IPP
NetWare
(Client)
Macintosh
*2
GSTN001
*1
), Win-
*1
),
protocols. This
iii