Gestetner CP6244 Operating Instructions Manual page 402

F
Press the {Master Making} key.
Printing starts automatically after
the trial print.
Note
❒ If you wish to check the image
before printing, press the {Auto
Cycle} key before pressing the
{Master Making} key, in order to
disable Auto Cycle mode. See
p.18 "When Auto Cycle mode is
off".
G
When the print job is finished,
press the {Clear Modes/Energy Sav-
er} key.
Your print settings are cleared and
the machine returns to its initial
condition.
viii
AQN024S
AQN025S