Gestetner CP6244 Operating Instructions Manual page 208

Windows NT 4.0 Configuration
Uninstalling SmartDeviceMonitor for Client
Preparation
Before uninstalling SmartDeviceMonitor for Client, make sure that:
• The port settings dialog box is closed.
• No printer is using the SmartDeviceMonitor for Client port as a printer port.
• You have performed login with the same user authority as that used to in-
stall SmartDeviceMonitor for Client.
A A A A
Open [Control Panel], and double-click the [Add/Remove Programs] icon.
B B B B
On the [Install/Uninstall] tab, click [SmartDeviceMonitor for Client], and click [Add/Re-
move].
4
C C C C
After the confirmation message appears, click [Yes].
UninstallShield removes all of the components of SmartDeviceMonitor for Client.
D D D D
After the confirmation message appears, click [Yes].
E E E E
Acknowledge the [Remove Shared File?] dialog box.
F F F F
When the uninstallation is complete, click [OK].
Setting Up the Printer Driver
The following procedure allows you to configure the printer port to use Smart-
DeviceMonitor for Client.
Preparation
The target machine must be turned on before starting the installation process.
A A A A
Install the printer driver of the machine you want to use.
B B B B
From the [Printers] window, click the icon of the machine. On the [File]
menu, click [Properties].
C C C C
Click the [Ports] tab, and then click [Add Port].
The [Add Port] dialog box appears.
D D D D
Click [SmartDeviceMonitor] from the list, and then click [New Port...].
The [Select Printer] dialog box appears and printers.
The displayed items are as follows:
Model Name: The model name of the printer.
Printer Name: The name of the printer.
Comment: Additional information about the printer.
Address: The IP address of the printer.
44